INFORMATION CENTRE
信息中心
联系我们 CONTACT US
服务热线：15921151253
邮箱：shbrrz@126.com
网址：www.shbrrz.com
地址：上海浦东金湘路225弄禹州大厦1725室
公司新闻 Information centre
深入开展附录四机械CE认证市场推广工作
发布时间：2016-10-9 浏览次数：102依据欧盟法规机械分为普通机械和危险类机械（即附录四机械）两种，危险类机械须颁发型式检验模式CE证书。如果危险类证书按照普通模式颁发，这是不规范的，将对清关及欧盟市场销售产生不利影响。我们作为专业危险类机械CE认证服务商，有着10多年经验，众多客户案例，我们对CE认证流程的熟练操作，保证了客户证书获得，并持续为客户提供服务。欢迎来电咨询！021-31338905
危险机械目录如下：
危险机械目录如下：
ANNEX IV
Categories of machinery to which one of the procedures referred to in Article 12(3) and (4) must be applied
1. Circular saws (single- or multi-blade) for working with wood and material with similar physical characteristics or
for working with meat and material with similar physical characteristics, of the following types:
1.1. sawing machinery with fixed blade(s) during cutting, having a fixed bed or support with manual feed of the workpiece
or with a demountable power feed;
1.2. sawing machinery with fixed blade(s) during cutting, having a manually operated reciprocating saw-bench or
carriage;
1.3 sawing machinery with fixed blade(s) during cutting, having a built-in mechanical feed device for the workpieces,
with manual loading and/or unloading;
1.4. sawing machinery with movable blade(s) during cutting, having mechanical movement of the blade, with manual
loading and/or unloading.
2. Hand-fed surface planing machinery for woodworking.
3. Thicknessers for one-side dressing having a built-in mechanical feed device, with manual loading and/or unloading
for woodworking.
4. Band-saws with manual loading and/or unloading for working with wood and material with similar physical characteristics
or for working with meat and material with similar physical characteristics, of the following types:
4.1. sawing machinery with fixed blade(s) during cutting, having a fixed or reciprocating-movement bed or support
for the workpiece;
4.2. sawing machinery with blade(s) assembled on a carriage with reciprocating motion.
5. Combined machinery of the types referred to in points 1 to 4 and in point 7 for working with wood and material
with similar physical characteristics.
6. Hand-fed tenoning machinery with several tool holders for woodworking.
7. Hand-fed vertical spindle moulding machinery for working with wood and material with similar physical characteristics.
8. Portable chainsaws for woodworking.
9. Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s.
10. Injection or compression plastics-moulding machinery with manual loading or unloading.
11. Injection or compression rubber-moulding machinery with manual loading or unloading.
12. Machinery for underground working of the following types:
12.1. locomotives and brake-vans;
12.2. hydraulic-powered roof supports.
13. Manually loaded trucks for the collection of household refuse incorporating a compression mechanism.
14. Removable mechanical transmission devices including their guards.
15. Guards for removable mechanical transmission devices.
16. Vehicle servicing lifts.
17. Devices for the lifting of persons or of persons and goods involving a hazard of falling from a vertical height of
more than three metres.
18. Portable cartridge-operated fixing and other impact machinery.
19. Protective devices designed to detect the presence of persons.
20. Power-operated interlocking movable guards designed to be used as safeguards in machinery referred to in
points 9, 10 and 11.
21. Logic units to ensure safety functions.
22. Roll-over protective structures (ROPS).
23. Falling-object protective structures (FOPS).
